Cisco 200-601 Exam Preparation Study Material

Question No. 1

What percentage of an I/O connection would you set the RPI in order to ensure the application has the most current data?

• A. RPI at 50% of IO rate
• B. RPI at 25% of IO rate
• C. PI to 25% of PAC scan rate
• D. Set RPI to 50% of PAC scan rate

Question No. 2

You have been tasked to design an Ethernet network capable of Motion control with cycle times not to exceed 1ms. In order to create a more deterministic network, what characteristic/s should you primarily focus on?

• A. Lattency and Jitter
• B. Redundancy and high availability
• C. Explicit and Implicit messaging
• D. This cycle time is not possible on an Ethernet network
• E. Gigabit port speed

Question No. 3

Which two actions are examples of network device hardening for Cisco Industrial Ethernet Switches? (Choose two)

• A. Disable unused services
• B. Shutdown network ports which are not in use
• C. Only allow administrative access using Telnet
• D. Deploy IP67 versions of Cisco Industrial Ethernet Switches
• E. Set the native VLAN on all trunk ports to VLAN 1

Question No. 4

Which in-depth approach is used when deploying defense in an industrial zone?

• A. Use PLCs and control systems from multiple vendors in such a way that the process will become resilient for failures of one vendor.
• B. Deploy two factor authentications for all operators which need to login remote while working from home.
• C. Collect log files at a central location for easy back-up and encryption to provide privacy.
• D. Create multiple zones in the industrial zone and protect / inspect traffic between the zones with firewalls and intrusion monitors.